Name: INFINITY BASSLINK MINI Underseat Woofer
SKU: INF06
Availability: InStock

Description

Specifications

Spec	Value
Driver Size	6″ × 8″ shallow-profile woofer Crutchfield+1
Amplifier Power	100 W RMS / 200 W peak Crutchfield+2shop.infinityspeakers.com+2
Frequency Response	~ 30 Hz to 150 Hz Crutchfield+2shop.infinityspeakers.com+2
Crossover / Low-Pass Filter	Adjustable from 50 Hz to 150 Hz, 12 dB per octave slope Crutchfield+2Xcite Audio+2
Bass Boost	0 dB up to +12 dB at about 50 Hz Crutchfield+1
Phase Control	Switchable (0° or 180°) Crutchfield+1
Inputs	Both line-level (RCA) and speaker-level inputs. When using speaker-level inputs, it has an “Audio Sense” so the unit can turn on automatically with a signal. Crutchfield+2Xcite Audio+2
Power Draw / Fuse	15 A fuse; max current draw ~13 A; quiescent (idle) draw < 600 mA Xcite Audio+1
Input Sensitivity	Low-level: ~ 0.1 V to 4.0 V; High/Speaker-level: ~ 0.25 V to 10 V (values differ a bit depending on source) Xcite Audio+1
Enclosure	Sealed enclosure, made of die-cast aluminum; has a metal grille for protection. Crutchfield+1
Dimensions	Approximately 11-7/16″ × 8-5/16″ × 3″ (≈ 289.6 mm × 209.6 mm × 75 mm) Xcite Audio+1
Weight	≈ 8.22 lb (≈ 3.73 kg) Xcite Audio
Warranty	1 year (parts & labor) typical from Infinity for this unit. Crutchfield+1

Features:

Remote bass level control (wired) — you can adjust the sub volume from the driver’s seat via the included remote module. Crutchfield+1
Low-pass crossover — variable between 50-150 Hz, so you can match what your main speakers are doing. Xcite Audio+1
Bass boost — gives extra +12 dB boost around ~50 Hz. Good if need more rumble in low frequencies. Crutchfield+1
Phase switch (0° / 180°) — helps align with the phase of your car’s speakers to avoid cancellations. Crutchfield+1
Audio-sense power turn-on when using speaker-level inputs — automatically turns the sub on when it senses a signal, avoiding the need for a remote turn-on wire in that setup. Harman Audio+1

What’s in the Box:

The BassLink Mini unit itself Crutchfield+1
Wiring harness for power, ground, remote, etc. Crutchfield+1
Remote bass level control with cable (~16.5′ / ~5 m) Crutchfield+1
15 A fuse (one spare included) Crutchfield+1
Mounting hardware / brackets / screws to secure under seat or other location Crutchfield+1

Because this is a powered unit, you don’t need a separate external amplifier. The built-in amp runs the woofer. Crutchfield+1
For good performance, the power wiring should be capable — many installers recommend using a 10-gauge power cable to supply it. Crutchfield+1
Mounting is typically under the passenger seat or somewhere similar where height is limited. With height of ~3″ it fits under many seats. Xcite Audio+1
Make sure ground is good; enough ventilation so the amp doesn’t overheat. Harman Audio+1

Because of its small woofer and compact enclosure, the bass will not hit as deep or be as loud as a full-size subwoofer in a large enclosure. This is more for subtle strong bass or “feel the low end” rather than earth-shaking boom.
At high volume / low frequencies (near the lower end of its response, ~30 Hz), distortion may increase unless gain / power is managed properly.
If the car has a lot of road noise or weak door panels, some of the low end might be less noticeable.